|
My throttle trim, throttle hold, or throttle curve functions seem to be working backward. For example, my trim only affects the high end not the low end. What's wrong?
Throttle reverse is a specialized function for very unique, special setups. It sounds like it is accidentally active in your radio. Turn the transmitter off and while holding down the 2 left most keys, turn the TX on. The STICK MODE screen should come up. Cursor up to the next screen, which says throttle rev. If it is norm make it REV, if it is REV make it norm. Turn the TX off and back on. Be prepared to reverse the direction of your throttle servo in the regular servo reverse screen and things should now operate normally.
Back to main FAQ/Contact Info page
|
