|
Can I assign flaperons, elevons, or ailevators to a switch so they're only functional sometimes (I want to use them for special stunts but not the rest of the time)?
Yes, for Flaperons, you will just need to do a PMix making Channel 1 the master, and Channel 6 the slave. You can set this on any switch, such as A in the down position, then go into the next screen and make your rates both +100%. You will not set any Offset at all.
Now with switch A up, you have function over only channel 1 and when you push switch A down, you will have Flaperon action on channels 1 and 6.
You will set up the same type of mixing for either Flaperon, Elevon, or Ailervators.
Back to main FAQ/Contact Info page
|
