I want to be able to drop a set amount of flaps or elevators or both for certain flight conditions (such as launching a glider). Can my 10C do this?
Absolutely! This is exactly what the air brake function is designed for.
| Objective |
Steps |
Keystrokes |
Set Up air brake |
Open the programming menu |
Press Mode, twice if needed, to go to Advanced Menu |
Select Air Brake |
Dial right to air brake, Press Dial to select |
Make it active |
Cursor Up once to Mix and Dial Left to On |
Check Stock Settings |
Move Switch C to down position. |
Adjust rates as needed |
|
Option available to change mode |
Change mode from manual to Linear if desired to operate air brakes from throttle stick |
Close Menu |
Press End Twice |
Note: you can turn either of these down to 0 if you want no reaction from channel 6 or channel 2.
|
