|
I have a 12FG and have set up my plane, using two ailerons and two elevators. Ailevator is active and all throws are in the right direction with the correct throws. However when I go to my AFR screen and add Dual rates to my aircraft, the dual rates only work on the Aileron or Elevator, with Aileron 2 and Elevator 2 still at full movement. What is the correct way to set up the plane so that the dual rates work on both Ailerons and both Elevators?
If you have set your model Type as 2-Aileron, and your Tail type as Ailevator, you do NOT need to go into your function screen and change the function of Aileron 2 and Elevator 2, from Null to a stick position, this is VERY important. After you selected these model and tail types, you will go into ELE/Camber and make this active. Then go into your Model Menu and set up your D/R, saving them as SNGL on both the Aileron and Elevator.
Once this has been done, both Elevators and both Ailerons should work with your Dual Rates.
Back to main FAQ/Contact Info page
|
