|
The CCPM management is not correct in my radio, as my servos do not work in parallel. It must be in the programming, what is wrong with my radio?
First of all it is impossible to get 3 servos moving the same amount and at the same speed so it is very important that the user pay close attention to starting his setup with all 3 servos in exactly the center position when the throttle stick is at center and that all servos use exactly the same size wheel with the connections to the servo at exactly the same distance out. Once this is done then the customer must use the ATV to get all 3 servos throwing exactly the same distance and PMIX if there is still some interaction.
All RADIO MANUFATURERS HAVE THIS SAME PROBLEM AND THE 14MZ IS THE FIRST RADIO THAT GIVES YOU THE PROGRAMMING TO MIX EVERYTHING OUT. All other radios were designed many years ago before CCPM became popular. Also CCPM has been used very successfully for the past few years with no problems by top pilots like Jason Krause, Wayne Mann, and Dwight Shilling.
Main Futaba FAQ/Contact Info page
|
