|
|
Radio System FAQ
When I activate the elevon mixer in my 6EXA transmitter, I can get the aileron function to work correctly, but not the elevator function; or I can get the elevator function to operate correctly and not the aileron function.
We have discovered a typographical error in the 6EXA instructions.
When you set up the elevon function, you must set it up as follows:
Right-hand control surface plugged into channel #2.
Left-hand control surface plugged into channel #1.
This is opposite to the instruction book.
The channel reversing may be both "NOR" or both "REV". It depends upon which side of the servo your pushrod attaches.
Back to main FAQ/Contact Info page
|
|
