|
|
Radio System FAQ
I want to use twin aileron servos (flaperons) with a 5 channel receiver, so my second servo must be plugged into channel 5 not channel 6. How do I do that?
This very easy to do the 7C. Just go into the Advanced menu, scroll with the dial until you get to the Flaperon menu. Here you will press the Dial, and then use the down Select key until you get to the bottom of the page to Ail-2. Turn the Dial until you see CH5 flashing. This will give you flaperon action on channels 1 and 5. You may also use this screen to set up flaperons on channels 1 and 7.
Back to main FAQ/Contact Info page
|
|
