|
|
Radio System FAQ
When I turn on my radio, I get a warning which says (throttle cut, idle down, snap roll, air brake, butterfly, inverted, throttle hold, or idle up). I've tried moving every switch on the radio, and I can change the error but not get rid of it. I cannot operate my radio. What do I do?
The 9C family of radios has a safety feature which will not allow you to attempt to start your model in any of these 'non-base' set ups for safety reasons. Unfortunately, from what you describe, you have accidentally programmed two or more of these features to the same switch, so that no matter what position that switch is in, one of these mixers is active and so you cannot operate the radio. This is a programming error that is a very important one to avoid for the obvious reason that it makes your radio inoperable and if it did not make your radio inoperable it would make your model potentially unsafe to operate.
The 9C includes an override to get around this programming error. Simply press both Select/Cursor keys simultaneously. This will temporarily override the error; however, for the safety of yourself, your model, and others, PLEASE immediately access the programming and fix the error.
Back to main FAQ/Contact Info page
|
|
