|
How to change modes (mode 1, mode 2, etc).
To change the software mode press and hold both the mode and end keys while you turn the radio on. This will take you to the STICK menu. Change this to your desired mode # (ie. mode 1= STK 1).
Note that this will only change the default programming. To operate properly in mode 1, a mode 2 radio needs the throttle ratchet exchanged for the elevator spring, the limiter blocks removed, and recalibration. The radio should be sent to an authorized service center to change the sticks mechanically.
Back to main FAQ/Contact Info page
|
