Radio System FAQ

Setting up a Delta wing with dual rudders.

1. Set the Elevons in CH1 and CH2 and activate the mix in your radio. (Page 48 in manual)
   
   
2. Plug the rudder into CH4 for rudder 1 and CH6 for rudder 2. (If you are using a separate nose wheel servo plug that into CH7)
   
   
3. In the advance menu (page 44 in manual) to set the dual rudders
   • Open PMIX 1
   • On the second page set the mix to active (OFF or ON)
   • Make the MASTER Rudder
   • Make the SLAVE CH6
   • Set the LINK and TRIM to on
   • Set the SWITCH to any switch and the POSITION to null
   • Set the percentage to 100%. (-100% if the servos are mounted opposite to one another).
   
   
4. Open PMIX 2 to set the airbrake
   • Set the mix to active (OFF or ON)
   • Set the MASTER to OFST
   • Set the Slave to RUDDER
   • Set the link to OFF
   • Set the Switch To the desired switch for airbrake activation in the position desired
   • Set the percentage to how much you want the servo plugged in channel 4 to move out upon airbrake application.
   
   
5. Open PMIX 3 to set the airbrake
   • Set the mix to active (OFF or ON)
   • Set the MASTER to OFST
   • Set the Slave to CH6 (FLAP)
   • Set the link to OFF
   • Set the Switch To the desired switch for airbrake activation in the position desired (Same switch and position as PMIX 2)
   • Set the percentage to how much you want the rudder servo in channel 6 to move out on airbrake application.
   
   
6. Open PMIX4 to set the steerable nose wheel
   • Set the mix to active (OFF or ON)
   • Set the MASTER to RUDDER
   • Set the Slave to CH7 (AUX1)
   • Set the link to OFF
   • Set the Switch To the desired switch for nose wheel activation in the position desired
   • Set the percentage to how much you want the Nose wheel to steer in relation to how far the rudder steers (often nose wheel steering needs to be less sensitive.)