|
|
Radio System FAQ
I would like to set up my Ultra Stick to have my elevator lower when I lower the flaps. I have already set up everything per the FAQ and also did the Full Span Ailerons per the FAQ and it works fine, but how do I set up my elevator?
What you will need to do is to go into Mix 6 or 7 and set up another mix using Aux2 as the Master and Elevator as the slave. You will turn Link on and make switch H activate the mix. On the next page you will then set the percentages however you want them, whether there is a large amount of elevator movement or just a little.
Once you have this set, the mix will be active on the slider that you have your flaps on, but it will not come on unless you flip the switch that activates your Full Span Ailerons.
Back to main FAQ/Contact Info page
|
|
