Futaba
spacer

Support
SEARCH:

Tech Support  |  FAQ  |  Service Center  |  Warranty Info  |  Glossary  |  Manuals  |  Discontinued Servos  |  Parts Listings


FASST Technology FAQ


I have gone to a 2-receiver setup for added insurance. Can this be done with the 2.4GHz system and how?

This is done very easily with this system. Simply use the linking process to bind both receivers to the same transmitter. When purchased as a transmitter receiver set, the receiver has already been linked to the transmitter at our factory. It will be necessary to use the Easy Link button to bind the second receiver.

To properly link the receiver follow these steps:

  • Turn on the transmitter. Check the LED on the back of the transmitter to make sure that it is green. If so, proceed to step 2. If not, power down the transmitter and turn it on once again.
  • Turn on the receiver.
  • With the receiver on, press and hold the ID Set button (located between the two antenna exits) for more than one second. When the linking process has completed the receiver's LED will change to a solid green.

Manuals  |  Team Futaba  |  Futaba Store  |  Contact Us  |  Team Tips  |  Web Site Updates
Multimedia  |  Software Updates  |  Downloads  |  Race Videos  |  News  |  Promotions  |  Find a Dealer


© 2007-2014 Hobbico, Inc. All rights reserved. Terms of Use
E-Bulletin Find Futaba on Facebook Watch our videos on YouTube Follow us on Twitter Google+ Best R/C