MPDX-1 Multi-Proportional System Decoder

• Plug the MPDX-1 into one channel of any PCM G3, PCM 1024 or FM receiver, and get eight in return — that's SEVEN MORE channels that a pilot can use any way he wishes.
• Unlike other channel expanders, all seven of the channels added with Futaba's MPDX-1 unit are fully proportional, switch-selectable — and all feature endpoint adjustment (ATV) and fail-safe!
• Very easy to set up; comes preset for PCM 2048 resolution.
• Also works well with Futaba's R148DP and R149DP receivers; or use two MPDX-1 units with an R5014DPS and gain 14 proportional channels!
• An inexpensive way to get the channel capabilities of a second radio!
• Note that this unit will only work with the 14MZ and FX40.

The MPDX-1 connects to the receiver output of a 14MHz or FX-40 System and expands the signal of one channel to 8 channels.

Features:

• Servo operation of 8 channels is possible with 1 channel.
• Linear operation
• Servo operation speed of each channel can be set.
• Fail-Safe for each channel can be set.
• 14MZ/FX40 can accommodate up to 2 multi-proportional decoders. Channel expansion up to 28 channels is possible with the R5014DPS receiver.
• Operating control setting, direction of operation change, and travel adjustments are possible for each multi-prop expanded channel.

SPECIFICATIONS:

Stock Number: FUTM4158
Weight: 14.2g
Dimensions: 29.6x39.3x15.8mm
Operation power requirement: 4.8 or 6.0V (4~5 NiCad batteries)
Current drain: 7.5mA
Number of multi-prop output channels: 8
Applicable modulation modes: PCM-G3, PCM1024, PPM
Multiplexing scheme: Pulse width division (PCM-G3, PCM1024), time division (PPM)
Delay function: Programmable for each channel
Fail-safe function: F/S function/HOLD function can be selected for each channel.

Note: Requires a 4.8V or 6.0V battery and switch.